DMG MORI NTX2500 2019 £POA
Through Spindle Coolant, Swarf Conveyor, C axis & Milling, Coolant, Y-axis, Interlocked guards, Low Volt Light, 3 Jaw Chuck, B axis, Tooling, Sub Spindle, High Pressure Coolant, Toolchanger
Control | FANUC 31iB5 CELOS |
Swing over the Cross-slide | 700mm |
B Axis | +/-120 degrees |
Bar Capacity | 80mm |
C axis | 0.0001 degree |
Chuck Size | 300mm (12") |
Distance Between Centres | 1842mm |
Maximum Cutting Diameter | 670mm |
Maximum Cutting Length | 1530mm |
Swing | 700mm |
Through Spindle Coolant Pressure | 7Mpa (1000psi) |
Rapid Feedrates | XYZA: 50 x 40 x 50 x 36m/minute |
Spindle Motor Power | 18.5kW |
Spindle Nose | A2-8 |
Spindle Speed | 4000rpm |
Sub Spindle Bar Capacity | 80mm |
Sub Spindle C axis | 0.0001 degree |
Sub Spindle Chuck Size | 300mm (12") |
Sub Spindle Motor | 18.5kW |
Sub Spindle Nose | A2-8 |
Sub Spindle Speed | 4000rpm |
Sub Spindle Stroke | 1542mm (A Axis) |
Maximum Tool Diameter | 70mm |
Maximum Tool Diameter with Empty Adjacent Pockets | 130mm |
Maximum Tool Length | 400mm |
Maximum Tool Weight | 8kg |
Milling Motor Power | 22kW |
Milling RPM | 20000rpm |
Tool Change Capacity | 76 Station |
Tool Size | CAPTO C6 |
X axis Travel | 675mm |
Y axis Travel | +/-150mm |
Z axis Travel | 1562mm |
Machine Dimensions | 8077 x 3598 x 3215mm |
Make | DMG MORI |
Model | NTX2500 |
Year | 2019 |
Type | Multi Tasking Lathes |
Price | £POA |
Location | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing