DMG MORI CTX Beta 1250 TC 2015 £POA
Swarf Conveyor, C axis & Milling, Tool setter, Coolant, Y-axis, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Manuals, B axis
Control | Siemens 840D |
Table Configuration | CAPTO C6 |
Swing over the Cross-slide | 495mm |
Bar Capacity | 104mm |
C axis | 0.001 degree |
Distance Between Centres | 1473mm |
Maximum Cutting Diameter | 469mm |
Maximum Cutting Length | 1200mm |
Maximum workpiece weight | 510kg |
Swing | 495mm |
Tailstock Body Travel | 1200mm |
Tailstock Taper | MT #5 |
Maximum C axis Speed | 200rpm |
Rapid Feedrates | 30m/minute |
Spindle Bore | 120.9mm |
Spindle Motor Power | 25kW |
Spindle Nose | FL170h5 |
Spindle Speed | 3600rpm |
Maximum Tool Diameter | 80mm |
Maximum Tool Diameter with Empty Adjacent Pockets | 120mm |
Maximum Tool Length | 300mm |
Maximum Tool Weight | 7kg |
Milling Motor Power | 22kW |
Milling RPM | 12000rpm |
Tool Change Capacity | 24 Station |
Tool Change Time (Chip to Chip) | 9 seconds |
B axis Travel | +/-110 degrees |
X axis Travel | 490mm |
Y axis Travel | +/-100mm |
Z axis Travel | 1300mm |
Make | DMG MORI |
Model | CTX Beta 1250 TC |
Year | 2015 |
Serial No | 0049001268C |
Type | Multi Tasking Lathes |
Price | £POA |
Location | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing